Lambda Probe, Rear [2016-2020, B4204T27; B4204T28 | 2020, B4204T39]: Removal

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Release the connector's catch.

Disconnect the connector.

See information about lifting points body, refer to: JACKING POINTS BODY

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

1. Torque:  M8, 24Nm
2. Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Remove the nuts.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the nuts.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the nuts.

Torque:  M6, 10Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Refer to: Special Tool: 999 5543  

Torque:  Lambda probe, tightening, 45Nm