LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Intake And Exhaust System - Removal, Replacement And Installation >> Actuator Turbo Pressure (Vacuum) >> Actuator Turbo Pressure (Vacuum) [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2017-2020, B4204T28 | 2020, B4204T39] >> Removal

Actuator Turbo Pressure (Vacuum) [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2017-2020, B4204T28 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details. 

GLL1038755Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

GLL1012412Courtesy of VOLVO CARS CORPORATION
NOTE:

Orientation view 

GLL1016176Courtesy of VOLVO CARS CORPORATION

Undo the hoses from the connections.

GLL1016389Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

GLL1030106Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

Torque:  M5, 5Nm