Pump, Leakage Detection [2016-2020, B4204T23; B4204T27 | 2016-2020, B4204T28 | 2020, B4204T39]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the right rear wheel WHEELS
Remove the fasteners.
Remove the marked part.
Disconnect the connector.
Loosen the wiring harness or move it to the side.
Undo the hoses from the connections.
Remove the screws.
Torque: M6, 10Nm
Release the lock.
Undo the hose from the connection.
Release the lock.
Undo the hose from the connection.
Release the catches.