Fuel Injector [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Installation
CAUTION:
Make sure that the components are positioned correctly.
NOTE:
Use new seals.
NOTE:
Make sure that a new component is installed.
NOTE:
A click confirms that the component is in the correct position.
Refer to: Special Tool: 999 7501
CAUTION:
Note the placing of the tool.
Refer to: Special Tool: 999 7502
NOTE:
Use a new seal.
CAUTION:
Make sure that the component is positioned correctly.
CAUTION:
Note the placing of the tool.
CAUTION:
Pull carefully.
WARNING:
Wait for the time specified.
CAUTION:
Note the placing of the tool.
CAUTION:
Make sure that the marked component has been removed.
To install, reverse the removal procedure.