Engine Cooling Fan [2019-2020, B4204T23; B4204T27 | 2016-2018, B4204T23; B4204T27; B4204T28, TG-81SC; TG-81SC AWD | 2019-2020, B4204T28 | 2020, B4204T39]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the clips.
Remove the marked detail/details.
Remove the screws.
On both sides.
Torque: M6, 10Nm
Remove the marked part.
Remove the air filter housing, refer to: AIR CLEANER HOUSING
Remove the screws.
Torque: M8, 24Nm
Remove the marked part.
Remove the screws.
On both sides.
Remove the marked part.
Remove the marked part.
Disconnect the connector.
Remove the cable harness clips.
Fold marked part aside.
Remove the marked part.
Remove the cable harness clips.
HINT: It may be necessary to twist or turn the component.