Timing Belt, Assembling [2016-2017, B4204T23 | 2016, 2017, 2020, B4204T27 | 2016-2017, B4204T28]: Installation

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that the component is positioned correctly.

Locate relevant marking.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that a new component is installed.

Install the screw.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that a new component is installed.

NOTE:

Only tighten the bolt finger tight at this stage.

Install the screw.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure to follow the sequence indicated.

Courtesy of VOLVO CARS CORPORATION

Remove the Special Tool.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that the area around the component is clean and free of foreign material.

NOTE:

Make sure that a new component is installed.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Only tighten the bolts finger tight at this stage.

Install the marked component.

Install the screws.

Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7495

Torque: M12, 80Nm

Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 115 9079

Tighten the bolts.

Torque:Oscillation damper (screw) to crankshaft

Stage 1: 20Nm
Stage 2: 90 °

Remove the Special Tool.

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Install the screws.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Install the screws.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Install the screws.

Torque: M8, 24Nm