ERAD Clutch Solenoid Connector [2016-2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Perform rear end, service position, refer to: REAR SUSPENSION, SERVICE POSITION

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Lift the marked component up

Torque: Solenoid Connector, to ERAD housing, 10Nm

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Remove the marked part.