LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Boot, Driveshaft Constant Velocity Joint, Outer >> Boot, Driveshaft Constant Velocity Joint, Outer [2016-2020, B4204T23, TG-81SC | 2016-2020, B4204T23; B4204T27, TG-81SC AWD | 2016-2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD] >> Removal

Boot, Driveshaft Constant Velocity Joint, Outer [2016-2020, B4204T23, TG-81SC | 2016-2020, B4204T23; B4204T27, TG-81SC AWD | 2016-2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD]: Removal

Remove the following items: 

GLL1018058Courtesy of VOLVO CARS CORPORATION
GLL1011729Courtesy of VOLVO CARS CORPORATION
CAUTION:

Note the position of the component before removal. 

Measure and mark as illustrated.

GLL1008165Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7161  

Use:  Copper mallet

GLL1017356Courtesy of VOLVO CARS CORPORATION
GLL1012866Courtesy of VOLVO CARS CORPORATION
GLL1012165Courtesy of VOLVO CARS CORPORATION