Removal And Installation

REMOVAL

NOTE:

Removal steps in this procedure may contain installation details.

Set the vehicle to Inactive mode, described in user mode, refer to: USAGE MODE

Courtesy of VOLVO CARS CORPORATION

NOTE:

Orientation view

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Release the catch.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10Nm

Lift the marked component forward.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Remove the marked part.

TRANSFERRING COMPONENTS

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque: M6, 10Nm

Remove the marked part.

INSTALLATION

To install, reverse the removal procedure.

NOTE:

This step is only necessary when installing a new component.

Order and download the appropriate Volvo software.