12V Socket, Rear Floor Console [2017, 2019, 2020, B4204T23; B4204T27]: Removal
On both sides.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
On both sides.
Remove the screw.
On both sides.
Loosen the marked detail/details.
NOTE:
The number of connectors may vary depending on the vehicle's equipment level.
Disconnect the connector.
- Release the catches.
- Remove the marked part.
Make sure to replace the marked component with a new.
- Release the catches.
- Remove the marked part.