Removal And Installation
REMOVAL
Orientation view
Remove the following items:
- Back cushion outer backseat, refer to: BACK CUSHION OUTER BACKSEAT
- Seat cushion, rear seat, refer to: SEAT CUSHION, REAR SEAT
Loosen the clips.
Loosen the clip.
Loosen the clips.
Remove the marked part.
Loosen the clip.
Loosen the component indicated. Do not remove it.
On both sides.
Remove the marked part.
On both sides.
Note the position.
Remove the marked part.
PREPARATION
Remove any tape or tape residue.
The following items must always be performed regardless of whether new components are installed or not.
Remove the clips.
The following items must always be performed regardless of whether new components are installed or not.
HINT: This step may require the aid of another technician.
Install the clip(s).
On both sides.
INSTALLATION
Install the marked component.
Note the position.
On both sides.
Install the marked component.
On both sides.
Install the marked component.
On both sides.
Install the clip(s).
Use a cable tie
Loosen the clips.
HINT: This step may require the aid of another technician.
On both sides.
Use a drill with the stated size
To install, reverse the removal procedure.