Air Bag Supplemental Restraint System [2016-2019, B4204T23; B4204T27]: Removal
Removal steps in this procedure may contain installation details.
Remove the screws.
Torque: Front seat to body, 40Nm
Remove the screws.
Torque: Front seat to body, 40Nm
Perform battery disconnecting and connecting, refer to: BATTERY DISCONNECTING AND CONNECTING
The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 30 seconds before disconnecting or removing any SRS components.
The number of connectors, cables and cable ties may vary depending on the vehicle specification.
Disconnect the connector.
Remove the fastener.
HINT: This step may require the aid of another technician.
Remove the marked part.
Remove the marked part.
Refer to: Special Tool: 981 4071
Disconnect the connectors.
Remove the screws.
On both sides.
Torque: Supplemental Restraint System Module (SRS), to Body, 10Nm