LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Engine - Removal, Replacement And Installation >> Oil Pan >> Oil Pan [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39] >> Removal

Oil Pan [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details. 

Remove oil filter, refer to: OIL FILTER

Remove oil cooler engine, refer to: OIL COOLER, ENGINE

GLL1027776Courtesy of VOLVO CARS CORPORATION

Torque:  M8, 24Nm

Remove the screw.

GLL1001408Courtesy of VOLVO CARS CORPORATION

Torque:  M6, 10Nm

Remove the screw.

Remove the marked part.

GLL1006950Courtesy of VOLVO CARS CORPORATION

Disconnect the connectors.

GLL1005289Courtesy of VOLVO CARS CORPORATION

Loosen the clips.

GLL1027194Courtesy of VOLVO CARS CORPORATION
WARNING:

Be prepared to collect escaping fluid. 

NOTE:

Use suitable paper to absorb any escaping fluid. 

Remove the cable harness clips.

Remove the screw.

Torque:  M6, 10Nm

GLL1020293Courtesy of VOLVO CARS CORPORATION

Note the value.

GLL1006506Courtesy of VOLVO CARS CORPORATION

Remove the screws.