LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Equipment & Supplemental Restraint Systems - Cleaning, Inspection And Adjustment >> Occupant Weight Sensor OWS, Cleaning >> Occupant Weight Sensor OWS, Cleaning [2016-2020]

Occupant Weight Sensor OWS, Cleaning [2016-2020]

Materials 
Designation  Part number 
H Cleaner 1161436

Remove Occupant weight sensor OWS, refer to: OCCUPANT WEIGHT SENSOR OWS

WARNING:

Wear safety goggles and protective gloves. 

GLL167234Courtesy of VOLVO CARS CORPORATION
NOTE:

Make sure that the component is clean and free of foreign material. 

Use:  H Cleaner, 1161436

CAUTION:

Make sure that the area around the component is clean and free of foreign material. 

WARNING:

Make sure to remove any spilled silicon(e) immediately. 

CAUTION:

Make sure that silicone waste is handled according to local regulations. 

Install Occupant weight sensor OWS, refer to: OCCUPANT WEIGHT SENSOR OWS

Calibrate according to: Diagnostics / Components / Control modules / Supplemental Restraint System Module (SRS) / Diagnostic sequences / Calibration of Occupancy weight sensor passenger seat (OWS)