LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Front End, Wings, Door Sill - Removal, Replacement And Installation >> Fender >> Fender [2016-2020] >> Removal

Fender [2016-2020]: Removal

NOTE:

Removal steps in this procedure may contain installation details. 

Remove the following items: 

GLL1019713Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Loosen the clips.

GLL1036109Courtesy of VOLVO CARS CORPORATION

Loosen the clips.

Detach the panel.

GLL1011436Courtesy of VOLVO CARS CORPORATION
GLL1000324Courtesy of VOLVO CARS CORPORATION

Release the catches.

GLL1036775Courtesy of VOLVO CARS CORPORATION
GLL1020572Courtesy of VOLVO CARS CORPORATION
GLL1035303Courtesy of VOLVO CARS CORPORATION

Release the catches.

Fold marked part aside.

GLL1029669Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

GLL1014214Courtesy of VOLVO CARS CORPORATION

Loosen the clips.

Remove the marked part.

GLL1039224Courtesy of VOLVO CARS CORPORATION
GLL1037025Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

GLL1037566Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Torque:  M6, 10Nm