Headlamp Lens, Restoration [2016-2020]: Reconditioning
NOTE:
When performing this operation it is recommended to use dust extraction.
NOTE:
Make sure the workstation is clean and dust free.
On both sides.
Remove the headlamp, refer to: HEADLAMPS
NOTE:
Make sure that all varnish is gone.
WET SANDING
WET SANDING
Wipe dry.
Apply a thin and even layer.
Use: Repair kit headlamp glass, China 31386953
Use: Repair kit headlamp glass, EU 31386875
Use: Repair kit headlamp glass, US 32219322
Apply an even layer.
Use: Varnish,
NOTE:
The drying time applies to varnish when the infrared (IR) drying technique is used.
Install the headlamps, refer to: HEADLAMPS