Antenna Amplifier, Radio [2016-2020]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Set the vehicle to Inactive mode, described in user mode, refer to: USAGE MODE
NOTE:
Orientation view
Remove the marked part.
Disconnect the connectors.
NOTE:
The graphic shows the back of the component before removal.
Remove the screw.
Remove the marked part.
Torque: M6, 10Nm
NOTE:
Orientation view
Detach left panel c-pillar, refer to: C-PILLAR TRIM PANEL
NOTE:
The graphic shows the back of the component before removal.
Disconnect the connectors.
Remove the screw.
Remove the marked part.
Torque: M6, 10Nm