Oil Cooler, Engine [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove the engine cooling fan, refer to: ENGINE COOLING FAN

Drain cooling system, draining, filling, and bleeding, refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Remove the hose.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Detach the following items:

Drain engine oil, refer to: OIL FILTER

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Torque: M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

Loosen the hose clamp.

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluids.

Remove the screws.

Remove the marked part.

Torque: M7, 17Nm

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that the gaskets are correctly located.

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Remove the marked part.