Muffler, Front [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Set the vehicle to Inactive mode, described in user mode, refer to: USAGE MODE

See information about lifting points body, refer to: JACKING POINTS BODY

Courtesy of VOLVO CARS CORPORATION

NOTE:

Orientation view

Courtesy of VOLVO CARS CORPORATION

Locate relevant marking.

Use: Pipe cutter

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque: Tunnel bracket, rear, to Body, 45Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Use a new seal.

Remove the nuts.

Torque: M8, 24Nm