Camshaft Position Sensor, Inlet Side [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2016-2020, B4204T28 | 2020, B4204T39]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
 Courtesy of VOLVO CARS CORPORATION
|
Loosen the screws.
Remove the marked part.
 Courtesy of VOLVO CARS CORPORATION
|
Release the connector's catch.
Disconnect the connector.
 Courtesy of VOLVO CARS CORPORATION
|
Remove the screw.
Torque:
M6, 10Nm