EVAP Valve [2018-2020, B4204T23; B4204T27 | 2018-2020, B4204T28 | 2020, B4204T39]: Removal
Loosen the screws.
Remove the marked part.
Disconnect the connector.
Remove the screw.
Undo the hose from the connection
Fold marked part aside.
CAUTION:
Observe caution when carrying out this step.
CAUTION:
The use of tools or excessive force will damage the quick release couplings.
Release the locks.
Loosen the marked part.
CAUTION:
Observe caution when carrying out this step.
CAUTION:
The use of tools or excessive force will damage the quick release couplings.
Release the locks.
Loosen the marked detail.
Loosen the clips.
Loosen the fastener.
Remove the marked part.