Radiator [2019-2020, B4204T23; B4204T27 | 2016-2018, B4204T23; B4204T27; B4204T28, TG-81SC; TG-81SC AWD | 2019-2020, B4204T28 | 2020, B4204T39]: Removal
Removal steps in this procedure may contain installation details.
Drain the cooling system, refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING
Remove the engine cooling fan, refer to: ENGINE COOLING FAN
Remove casing, refer to: COVER BUMPER FRONT
Undo the hoses from the connections.
On both sides.
Undo the hose from the connection.
Disconnect the connector.
Remove the nuts.
Torque: M5, 5Nm
Remove the marked part.
Release the catches.
Release the locks.
Remove the marked part.
Disconnect the connector.
Remove the screws.
Torque: M6, 10Nm
Remove the clips.
Release the locks.
Remove the marked part.
Loosen the clips.
Release the locks.
Remove the marked part.
Release the locks.
Lift the marked component forward.
Depress the locking device.
Remove the marked part.