Engine Coolant Pump [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2018-2020, B4204T28 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove intake manifold, refer to: INDUCTION PIPE

Perform cooling system draining, charging and bleeding, refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

Release the lock.

Remove the hose.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: M8, 24Nm