Bypass Valve, A/C Cooling [2016-2020, B4204T23 | 2016-2020, B4204T27]: Removal
Removal steps in this procedure may contain installation details.
Orientation view
Drain cooling system, draining, filling, and bleeding, refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING
Remove support battery, refer to: SUPPORT BATTERY
Remove the battery control switch module bcsm, refer to: BATTERY CONTROL SWITCH MODULE BCSM
Make sure that the seal is correctly located.
Remove the marked part.
Release the locks.
Remove the part carefully
Release the catches.
Fold marked part aside.
Remove the screws.
Torque: M6, 10Nm
Remove the screw.
Torque: M6, 10Nm
Remove the marked part.
Disconnect the connector.
Fold marked part aside.
Note the routing of the lines and hoses.
Note the position of the components before removal.
Loosen the hose clamps.
Undo the hoses from the connections.
Remove the screws.
Torque: M5, 5Nm