Lambda Probe, Rear [2018, B4204T23]: Removal

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Loosen the hose clamps.

Remove the marked part.

Torque:  M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Loosen the clip.

Remove the marked part.

Refer to: Special Tool: 999 5543