LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Accessory Drive Belts >> Engine - Removal, Replacement And Installation >> Vibration Damper >> Vibration Damper [2016-2017, B4204T23 | 2016-2017, B4204T27] >> Removal

Vibration Damper [2016-2017, B4204T23 | 2016-2017, B4204T27]: Removal

NOTE:

Removal steps in this procedure may contain installation details. 

Remove the auxiliary drive belt, refer to: AUXILIARY DRIVE BELT  

GLL1037329Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque:  M8, 24Nm

GLL1027558Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque:  M8, 24Nm

GLL1004108Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque:  M6, 10Nm

Remove right front wheel, refer to: WHEELS

GLL1008462Courtesy of VOLVO CARS CORPORATION

Remove the clip.

Remove the nuts.

GLL1035453Courtesy of VOLVO CARS CORPORATION

Remove blind rivet.

Remove the screws.

GLL1018544Courtesy of VOLVO CARS CORPORATION

Remove the clips.

Remove the screws.

Remove the marked part.

GLL1011674Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

GLL1042198Courtesy of VOLVO CARS CORPORATION

Lower to suitable height.

GLL1005694Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7495  

Remove the screw.

GLL1030215Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 115 9079 

Remove the screws.

Remove the Special Tool.

GLL1033790Courtesy of VOLVO CARS CORPORATION

Remove the marked part.