Front SUBFRAME, Service Position [2016-2019, B4204T23; B4204T27 | 2020, B4204T23; B4204T27, TG-81SC; TG-81SC AWD]: Installation

To install, reverse the removal procedure.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Only tighten the nuts and bolts when the suspension is in the normal drive position.

Torque:Shock Absorber Fork to Front Lower Control Arm,

See information about normal position, refer to: NORMAL POSITION

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the seal is correctly located.

Remove the cable tie(s).

Courtesy of VOLVO CARS CORPORATION

Remove the cable tie(s).