Timing Belt, Dismantling [2016-2020, B4204T23 | 2016-2019, B4204T27 | 2016-2019, B4204T28]: Removal
Refer to: Special Tool: 999 7495
Remove the screw.
Refer to: Special Tool: 115 9079
Remove the screws.
Remove the Special Tool.
Remove the marked part.
Remove the screws.
Remove the marked part.
Remove the screws.
Remove the marked part.
Remove the screws.
Remove the marked part.
WARNING:
Make sure that the component is positioned correctly.
Locate relevant marking.
Refer to:Special Tool: 999 7497
Refer to: Special Tool: 999 7497
NOTE:
Make sure to turn the component until stop.
Tighten the nuts.
Loosen the screws.
Remove the marked part.