LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Transfer Case Connecting Sleeve Seals >> Transfer Case Connecting Sleeve Seals [2016-2020, B4204T23; B4204T27, TG-81SC AWD] >> Removal

Transfer Case Connecting Sleeve Seals [2016-2020, B4204T23; B4204T27, TG-81SC AWD]: Removal

Remove bevel gear, refer to: BEVEL GEAR

GLL161991Courtesy of VOLVO CARS CORPORATION
WARNING:

Be prepared to collect escaping fluid. 

Release the lock.

GLL161992Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 5575  and Special Tool: 999 5777  

GLL161993Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7182  and Special Tool: 999 5069  

GLL161994Courtesy of VOLVO CARS CORPORATION
GLL161995Courtesy of VOLVO CARS CORPORATION
GLL161996Courtesy of VOLVO CARS CORPORATION
WARNING:

Wear protective gloves. 

Refer to: Special Tool: 999 7181 

GLL161997Courtesy of VOLVO CARS CORPORATION
WARNING:

Make sure that the component is at ambient air temperature. 

Refer to: Special Tool: 999 7182  

GLL161998Courtesy of VOLVO CARS CORPORATION
GLL161991Courtesy of VOLVO CARS CORPORATION

Install the catch.