Sealing Ring, Driveshaft, Front Right [2016-2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD]: Removal

Remove the right drive shaft, refer to: DRIVE SHAFT RIGHT  

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the nuts.

Torque:  M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque:  Clamp catalytic converter, 20Nm

Courtesy of VOLVO CARS CORPORATION

Lift the marked component up

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

1. Torque:  M8, 24Nm
2. Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

1. Torque:  M8, 24Nm
2. Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7566  

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION