LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> HALFSHAFT Bearing >> HALFSHAFT Bearing [2016-2018, TG-81SC; TG-81SC AWD | 2019-2020, B4204T23, TG-81SC | 2019-2020, B4204T23; B4204T27, TG-81SC AWD | 2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD] >> Removal

HALFSHAFT Bearing [2016-2018, TG-81SC; TG-81SC AWD | 2019-2020, B4204T23, TG-81SC | 2019-2020, B4204T23; B4204T27, TG-81SC AWD | 2019, B4204T28, TG-81SC | 2020, B4204T28; B4204T39, TG-81SD]: Removal

Remove the right drive shaft, refer to: DRIVE SHAFT RIGHT  

GLL1036801Courtesy of VOLVO CARS CORPORATION

HINT: Mark the location of the component. 

GLL1017551Courtesy of VOLVO CARS CORPORATION

Use:  Air-powered grinding/cutting machine

GLL1020590Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

GLL176283Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7423  

GLL176282Courtesy of VOLVO CARS CORPORATION
GLL176280Courtesy of VOLVO CARS CORPORATION
WARNING:

Wear ear protectors.