LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Differential Input Shaft Seal >> Differential Input Shaft Seal [2016-2020, B4204T23, TG-81SC AWD | 2016-2020, B4204T27, TG-81SC AWD] >> Installation

Differential Input Shaft Seal [2016-2020, B4204T23, TG-81SC AWD | 2016-2020, B4204T27, TG-81SC AWD]: Installation

GLL170321Courtesy of VOLVO CARS CORPORATION
CAUTION:

Make sure that the surface is clean and free of foreign material. 

GLL170313Courtesy of VOLVO CARS CORPORATION
CAUTION:

Only use the specified material to lubricate the seals. 

Use:  Rear axle oil, 1161620

GLL170318Courtesy of VOLVO CARS CORPORATION

Install the marked component.

GLL170316Courtesy of VOLVO CARS CORPORATION

Refer to: special Tool: 999 7339  

Fill with oil, refer to:DIFFERENTIAL FLUID LEVEL CHECK

Install clutch four-wheel drive, refer to: CLUTCH FOUR-WHEEL DRIVE