Clutch Four-Wheel Drive [2016-2020, B4204T23, TG-81SC AWD | 2016-2020, B4204T27, TG-81SC AWD]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the propeller shaft, refer to: PROPELLER SHAFT
Disconnect the connector.
WARNING:
Be prepared to collect escaping fluid.
Remove the screws.
Torque: M8, 24Nm
WARNING:
Be prepared to collect escaping fluid.
Remove the screws.
Torque: M8, 24Nm
WARNING:
Be prepared to collect escaping fluid.
Remove the part carefully