Brake Pads, Front [2018-2020, B4204T23; B4204T27; B4204T28 | 2016-2017, B4204T23; B4204T27, TG-81SC; TG-81SC AWD | 2016-2017, B4204T28, TG-81SC | 2020, B4204T39]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
See information about safety information brake system, refer to: SAFETY INFORMATION BRAKE SYSTEM
Remove the wheel, refer to: WHEELS
Remove the screw.
Torque: M5, 5Nm
Remove the marked part.
WARNING:
Make sure that no load is placed on the brake hose.
Remove the screws.
Refer to: Special Tool: 999 7605
Torque: Slide rail front brake caliper, 57Nm
Fold marked part aside.
Remove the marked detail/details.
NOTE:
Make sure that the correct side of the tool (flat side) is facing the brake piston. The brake piston must be pushed in, not rotated.
Refer to: Special Tool: 999 5767 , and Special Tool: 999 5782