Removal And Installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
Use: Interior trim remover
Fold marked part aside.
- Release the lock.
- Fold marked part aside.
Remove the screw.
Torque: Seat belt guide, to Bracket, 4.4Nm
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
TRANSFERRING COMPONENTS
Remove the marked part.
INSTALLATION
To install, reverse the removal procedure.