Seat Track, 2ND Seat Row [2016-2020]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove relevant side seat belt buckle rear, refer to: SAFETY BELT BUCKLE, REAR

CONCERNS OUTER POSITION

Courtesy of VOLVO CARS CORPORATION

Release the catch.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Torque: Seat track, to seat, 22Nm

Remove the screws.

On both sides.

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Remove the marked part.

On both sides.

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Remove the marked part.

CONCERNS CENTER POSITION

Courtesy of VOLVO CARS CORPORATION

Torque: Seat belt bracket, to Seat, 40Nm

Remove the screw.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

Torque: Seat track, to seat, 22Nm

Remove the screws.

On both sides.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

On both sides.

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The following steps are only necessary when installing a new component.

Torque: Bracket, to Seat track, 26Nm

Remove the screws.