Cylinder Head [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Removal

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

Remove the upper torque rod, refer to: UPPER TORQUE ROD  

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque:  Engine mount bracket, to Engine pad, 110Nm

Remove Engine Rear Lower Support Insulator RH, refer to: ENGINE REAR LOWER SUPPORT INSULATOR RH  

Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7534 

Use:  Screw M10 x 20 mm

Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7533  

Remove the following items: 

• camshaft seal, refer to: CAMSHAFT SEAL  
• the fuel rail, refer to: FUEL RAIL
• turbocharger, refer to: TURBOCHARGER
• coolant pump, refer to: ENGINE COOLANT PUMP
• Oil trap, refer to: OIL TRAP

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque:  M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screws.