LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Engine - Removal, Replacement And Installation >> Crankshaft Seal, Rear >> Crankshaft Seal, Rear [2016-2020, B4204T23; B4204T27, TG-81SC; TG-81SC AWD] >> Removal

Crankshaft Seal, Rear [2016-2020, B4204T23; B4204T27, TG-81SC; TG-81SC AWD]: Removal

Remove drive flange plate, refer to: CARRIER PLATE  

GLL1031823Courtesy of VOLVO CARS CORPORATION
CAUTION:

Take extra care not to damage the mating faces. 

NOTE:

Use suitable paper to absorb any escaping fluid. 

Refer to: Special Tool: 999 5651