LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T6 R-Design >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Engine - Removal, Replacement And Installation >> Crankshaft Seal, Rear >> Crankshaft Seal, Rear [2016-2020, B4204T23; B4204T27, TG-81SC; TG-81SC AWD] >> Installation

Crankshaft Seal, Rear [2016-2020, B4204T23; B4204T27, TG-81SC; TG-81SC AWD]: Installation

GLL1034975Courtesy of VOLVO CARS CORPORATION
CAUTION:

Make sure that the mating faces are clean and free of foreign material. 

Refer to: Special Tool: 999 7174  

Install carrier plate, refer to: CARRIER PLATE