Removal And Installation

REMOVAL

NOTE:

Removal steps in this procedure may contain installation details.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Orientation view

Remove side panel cargo compartment, refer to: SIDE PANEL LOADSPACE

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Lift the marked component up

Courtesy of VOLVO CARS CORPORATION

Remove the clip.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

The number of connectors, cables and cable ties may vary depending on the vehicle specification.

Disconnect the connectors.

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: Rear seat, to body, 40Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Torque: Buckle safety belt to seat, 40Nm

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: Rear seat, to body, 40Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

This step requires the aid of another technician.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Orientation view

Remove side panel cargo compartment, refer to: SIDE PANEL LOADSPACE

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

On both sides.

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Lift the marked component up

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

The number of connectors, cables and cable ties may vary depending on the vehicle specification.

Disconnect the connectors.

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The graphic shows the back of the component before removal.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: Rear seat, to body, 40Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Torque: Buckle safety belt to seat, 40Nm

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: Rear seat, to body, 40Nm

Courtesy of VOLVO CARS CORPORATION

WARNING:

This step requires the aid of another technician.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

WARNING:

This step requires the aid of another technician.

Remove the marked part.

TRANSFERRING COMPONENTS

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Remove head restraint, third seat row, refer to: HEAD RESTRAINT, THIRD SEAT ROW

Courtesy of VOLVO CARS CORPORATION

Release the catches.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Use: Hogring pliers

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Release the catches.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Use: Hogring pliers

Courtesy of VOLVO CARS CORPORATION

Loosen the clips.

Courtesy of VOLVO CARS CORPORATION

On both sides.

Loosen the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Remove the fastener.

Use a cable tie

Courtesy of VOLVO CARS CORPORATION

Remove the fastener.

Courtesy of VOLVO CARS CORPORATION

Loosen the marked detail.

Courtesy of VOLVO CARS CORPORATION

The part is not to be reused.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

On both sides.

Courtesy of VOLVO CARS CORPORATION

Use a drill with the stated size

Remove blind rivet.

Use: Blind rivet, 30622760

Courtesy of VOLVO CARS CORPORATION

Remove the clip.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

INSTALLATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that a new bolt is installed.

Install the screw.

Torque: Wire guide screw, 40Nm

On both sides.

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Install the clip(s).

A click confirms that the component is in the correct position.

Courtesy of VOLVO CARS CORPORATION

On both sides.

Install the marked component.

A click confirms that the component is in the correct position.

Courtesy of VOLVO CARS CORPORATION

Install fastener.

A click confirms that the component is in the correct position.

Courtesy of VOLVO CARS CORPORATION

Use a cable tie

Courtesy of VOLVO CARS CORPORATION

NOTE:

Ensure that the component is in contact with the surface, with no space.

On both sides.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Check that the component has locked in its bottom position.

Depress the locking device.

On both sides.

CHECK

Courtesy of VOLVO CARS CORPORATION

Repeat the number of times stated

A click confirms that the component is in the correct position.

On both sides.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Ensure that the component is in contact with the surface, with no space.

On both sides.

To install, reverse the removal procedure.