Headlamp Washer Jet [2016-2020]: Installation
To install, reverse the removal procedure.
EXTRA INFORMATION
When repairing a component (no replacement)
Remove casing bumper front, refer to: COVER BUMPER FRONT
Use: Cleaning agent, 1161721
Allow to dry.
Use: Cleaning agent, 1161721
Allow to dry.
Refer to: Special Tool: 951 2950
Use: Mixing pipe, 1161730 Use: Glue, 9511027
CAUTION:
Wait the specified time before the component is loaded.
CAUTION:
Make sure that the component is positioned correctly.
Use: Masking tape,
Install casing bumper front, refer to: COVER BUMPER FRONT