Removal And Installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
Remove the marked part.
On both sides.
Remove the screws.
On both sides.
Remove the marked part.
CLEANING
See information about components with double-sided adhesive tape, refer to: COMPONENTS WITH DOUBLE-SIDED TAPE
Use: H Cleaner, 31375637
INSTALLATION
Use: Applicator, 1161825
Use: Primer, 1161727
Use: Weatherstrip, 31484707
Place the component where indicated in the graphic.
Operate roof hatch, refer to: SUN ROOF
To install, reverse the removal procedure.