Master Cylinder, Brake [2019 | 2020, B4204T23; B4204T27 | 2018, B4204T23; B4204T27, TG-81SC; TG-81SC AWD | 2018, B4204T28, TG-81SC]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Follow instructions about safety information brake system, refer to: SAFETY INFORMATION BRAKE SYSTEM
Remove the wiper mechanism, windscreen, refer to: WIPER MECHANISM, WINDSHIELD
Remove reservoir brake fluid, refer to: RESERVOIR, BRAKE FLUID
WARNING:
Be prepared to collect escaping fluid.
CAUTION:
Make sure that all openings are sealed.
NOTE:
Make sure that the seal is correctly located.
Torque: Ø8 mm diameter brake line, 18Nm
Loosen the clip.
WARNING:
Make sure that new nuts are installed.
Torque: Master cylinder, to Brake booster, 50Nm
Remove the nuts.
Remove the marked part.