Vacuum Pump, Brake Booster [2014-2015, B4204T10 | 2014-2016, B4204T9]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: Lower torque rod bracket to transmission housing, 60Nm

Courtesy of VOLVO CARS CORPORATION

Disassemble the following items:

Torque: Lower torque rod rear right, to Engine mount bracket, 110Nm
Torque: Lower torque rod rear right, to subframe
- Stage 1: 90 Nm
- Stage 2: 80 °

Courtesy of VOLVO CARS CORPORATION

Special Tool: 999 7486

Torque: M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Remove the upper torque rod, refer to: UPPER TORQUE ROD

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Detach the following items:

Torque: M12, 80Nm
Torque: Bracket engine mounting to cylinder head
- Stage 1: 90 Nm
- Stage 2: 120°
Torque: Bracket to cylinder head, stud bolt, 60Nm

Courtesy of VOLVO CARS CORPORATION

Lower the engine.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Remove the hose.

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Remove the hose.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamps.

Remove the hose.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Remove the hose.

Remove the fuel pump, refer to: FUEL PUMP

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

CAUTION:

Make sure that the area around the component is clean and free of foreign material.

CAUTION:

This component is sensitive to "mechanical stresses". If the component has been dropped onto the floor, for example, it must not be installed in a vehicle.

Remove the screws.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that a new component is installed.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Use lint free cloth.

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Use: Isopropanol, 1161721