Vacuum Pump, Brake Booster [2014-2016, B4204T11 | 2014-2016, B4204T12]: Removal
Removal steps in this procedure may contain installation details.
Remove the fuel pump, refer to: FUEL PUMP
Make sure that the area around the component is clean and free of foreign material.
Make sure that all openings are sealed.
Remove the hose.
Loosen the hose clamp.
Loosen the hose clamp.
Remove the hose.
Remove the screw.
Torque: M6, 10Nm
Loosen the hose clamp.
Remove the hose.
Remove the screw.
Torque: M6, 10Nm
Be prepared to collect escaping fluid.
Make sure that the area around the component is clean and free of foreign material.
This component is sensitive to "mechanical stresses". If the component has been dropped onto the floor, for example, it must not be installed in a vehicle.
Remove the screws.
Torque: M8, 24Nm
Make sure that a new component is installed.