Intake System, Check [2014-2015, B4204T11 | 2015-2016, B4204T11, TG-81SC]: Inspection
SPECIAL TOOLS
| 981 4118 LEAK DETECTOR Tool number: 981 4118 Tool description: LEAK DETECTOR Tool boards: EU99 |
|
| 999 5544 REGULATOR (USED WITH 9995545 -99955469 Tool number: 999 5544 Tool description: REGULATOR (USED WITH 9995545 -99955469 Tool boards: 23 |
|
| 999 5545 ADAPTOR (INTAKE SYSTEM USED WITH -5544)P200-900 Tool number: 999 5545 Tool description: ADAPTOR (INTAKE SYSTEM USED WITH -5544)P200-900 Tool boards: 23 |
| Materials | |
|---|---|
| Designation | Part number |
| soap solution | |
REMOVAL
Loosen the clips.
Loosen the hose clamp.
Remove the hose.
LEAK DETECTION
NOTE:
Always follow the manufacturer's instructions when handling the equipment.
Refer to: Special Tool: 981 4118
NOTE:
Always follow the manufacturer's instructions when handling the equipment.
Refer to: Special Tool: 981 4118
REMOVAL
Loosen the hose clamp.
Undo the hose from the connection.
Make sure that the opening is blocked.
LEAK DETECTION
Refer to: Special Tool: 999 5544
Refer to: Special Tool: 999 5545
Use: soap solution,
Use: soap solution,
INSTALLATION
Install the hose.
Tighten the hose clamp.
Install the clip (s).