Master Cylinder, Brake [2010-2016 | 2009, B6304T2 | 2008-2009, B6324S]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
See information about safety information brake system, refer to: SAFETY INFORMATION BRAKE SYSTEM
Remove the following items:
- battery, refer to: BATTERY
- Reservoir, brake fluid, refer to: RESERVOIR, BRAKE FLUID
- plenum cover, refer to: PLENUM COVER
Torque: M6, 10Nm
CAUTION:
Make sure that all openings are sealed.
NOTE:
Make sure that the seal is correctly located.
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: M8, 24Nm