Removal And Installation
REMOVAL
Loosen the clips.
Loosen the hose clamp.
Remove the hose.
LEAK DETECTION
NOTE:
Always follow the manufacturer's instructions when handling the equipment.
NOTE:
Always follow the manufacturer's instructions when handling the equipment.
REMOVAL
Loosen the hose clamp.
Undo the hose from the connection.
Make sure that the opening is blocked.
LEAK DETECTION
Special Tool: 999 5544 and Special Tool: 999 5545
Use: soap solution
Use: soap solution
INSTALLATION
Install the hose.
Tighten the hose clamp.
Install the clip(s).