Checking The Connectors
- Ignition off.
Check connector 54/3 and the connector for the central electronic module (CEM). Check for contact resistance and oxidation. Remedy if necessary.
Check for any damage.
HINT: If the fault cause is found, reinstall the components, connectors etc. If the fault cause is not found, do not reinstall the central electronic module (CEM) before continuing with fault-tracing.
Other information:
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- see CHECKING WIRING AND TERMINALS .
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
Refer to CHECKING THE COMPONENT AND CABLE