Checking The Wires And Connectors
Check wires and connectors between central electronic module (CEM) 6E and battery for an intermittent open circuit as described in, see OPEN-CIRCUIT, INTERMITTENT FAULTS and for a loose contact as described in LOOSE CONNECTIONS (TERMINALS) . Check especially for any damage.
Check wires between central electronic module (CEM) 1E and ground point/ground on left A-pillar for an open circuit as described in, see OPEN-CIRCUIT, INTERMITTENT FAULTS . Check especially for any damage.
Do the necessary corrective action.
Additional information
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To connect a test box, see CONNECTING THE BREAKOUT BOX
- Continue
Refer to INFORMATION